바로 상담
왕우미
영업 관리자 - 왕우미
왕우미
영업 관리자 - 왕우미
  • 전화 번호
    01081386313
    전화하기
  • QR 코드를 찍고 WeChat 추가
    w1713361168
    WeChat
  • QR 코드를 찍고 kakao 추가
    01081386313
    kakao
  • 이메일
    wangyuwei@neware.com.cn
    이메일 발송
왕우미
영업 관리자 - 왕우미
  • 전화 번호
    01081386313
    전화하기
  • QR 코드를 찍고 WeChat 추가
    w1713361168
    WeChat
  • QR 코드를 찍고 kakaokao 추가
    01081386313
    kakao
  • 이메일
    wangyuwei@neware.com.cn
    이메일 발송
지역 또는 언어 선택
CE-6000n for Cell&Module
PACK测试仪(Tower系列)
CE-6000_copy
  • Model
  • Material Code
    CE-6012n-20V50A-H
  • Channel information
  • Number of Channels
    Number of Channels per Cabinet: 12
  • Main Channel

    通道特点:CC-CV恒流源与恒压源采用双闭环结构;

    通道控制模式:独立控制;

    通道并联:支持通道并联,并联后不支持脉冲和模拟测试;

  • Input Indicators
  • Input Power
    AC380V±15% 50/60±5Hz
  • Power Factor
    ≥99%(Full Load)
  • THDi
    ≤5% (Full Load)
  • Input Impedance
    ≥1MΩ
  • Input Power
    14.1 KW
  • Input Current
    21.5 A/per Phase
  • Efficiency
    90%
  • Noise
    ≤65dB
  • Voltage and Current Testing Sampling
    Four Wire Connection (Same Port for Charging and Discharging)
  • Power Control Module Type
    MOSFET
  • Input Power Wiring Mode
    Three Phase Five Wire
  • Protect
    Anti Surge, Anti Islanding, Overfrequency and Underfrequency, Overvoltage and Undervoltage, Phase Lacking Protection, etc
  • Function and Performance Index
  • Simulation Step

    充电模式:电流、功率;

    放电模式:电流、功率;

    切换:支持充放电连续切换;

    截止条件:时间、行号;

    下载数据量:最大支持100万行工况下载;

  • Voltage

    Testing Range per Channel

    Charging: 0V~20V;Discharging: 2V~20V;


    Minimum Discharge Voltage

    2V;


    Accuracy

    ±0.02%  of  FS;


    Resolution

    24bit;

  • Current

    Testing Rang per Channel: 0.25A~50A;

    Accuracy (Independent Range): ±0.05%  of  FS;

    Constant Voltage Cut-off Current: 50mA;

    Resolution: 24bit;

  • Power

    Output Power per Channel: 1KW;

    Overall Output Power: 12KW;

  • Time

    Current Response Time: ≤3ms;

    Current Conversion Time: ≤6ms;

    Minimum Step Time: 0.1s;

  • Charge and Discharge Mode

    Charge and Discharge Mode

    Constant Current Charging, Constant Voltage Charging, Constant Current and Constant Voltage Charging (Smooth Transition from Constant Current to Constant Voltage; Prevent the impact of current spike and large current on the battery in order to protect battery), Constant Power Charging

    Constant Current Discharge, Constant Voltage Discharge, Constant Power Discharge, Constant Resistance Discharge


    Cut-off Condition

    Voltage, Current, Relative Time, Capacity, -ΔV

  • Simulation Step

    Charging Mode: Current, Power;

    Discharging Mode: Current, Power;

    Switch: Support continuous switching between charge and discharge;

    Cut off condition: Time, Line number;

    Amount of Data Download: Maximum Support for 1 Million Line Simulation Download;

  • Pulse Step

    Charging Mode: Current, Power;

    Discharging Mode: Current, Power;

    Minimum Pulse Width: 100ms;

    Pulse No.: A single pulse step can support 32 different pulses;

    Charge and Discharge Continuous Switching: One pulse step can realize continuous switching from charging to discharging;

    Cut off condition: Voltage, Relative Time;

  • DCIR DC Internal Resistance Test
    Support custom point fetching for DCIR calculation.
  • Security Protect

    软件保护

    掉电数据保护;

    具有脱机测试功能;

    可设定安全保护条件,可设置参数包括:电压下限、电压上限、电流下限、电流上限、延时时间;


    硬件保护

    防反接保护、过压保护、过流保护、过温保护等;

  • Data Management and Analysis
  • Step Setting Mode
    Table Editing
  • Data Record

    Recording Conditions

    Minimum Time Interva: 10ms;

    Minimum Voltage Interval: 0.04V;

    Minimum Current Interval: 0.1A;


    Recording Frequency

    100Hz;

  • Database
    Using MySQL database to centralized manage testing data.
  • Data Output Mode
    Excel, Txt
  • Curve Type
    Customizable Drawing, 4 Y Axes.
  • Barcode Scanning
    Support barcode scanning function, and realize the management and traceability of historical data through battery barcode.
  • Communication Mode
  • Upper Computer Communication Mode
    Based on TCP / IP Protocol
  • Communication Interface
    Ethernet
  • Lower Computer Communication Baud Rate
    1M Bandwidth
  • Upper Computer Communication Baud Rate
    10M~100M Self-adaption
  • Networking Mode
    Set up LAN through switch and router.
  • Communication Extension (Optional)
    Support CAN, RS485 communication and BMS communication, with DBC configuration function.
  • Environmental Requirements, Size and Weight
  • Working Temperature
    -10℃~40℃ (Within the range of 25 ± 10 ℃, ensure the measurement accuracy: the accuracy drift is 0.005% of FS / ℃)
  • Storage Temperature
    -20℃~50℃
  • Relative Humidity of Working Environment
    ≤70% RH (No Water Vapor)
  • Equipment Size W*D*H
    600*800*1300(mm)
  • Aux Testing System (Optional)
  • Temperature Auxiliary Channel

    Temperature Range: -40℃~200℃;

    Temperature Accuracy: ±1℃;

    Temperature Resolution: 0.1℃;

  • Voltage Auxiliary Channel

    Voltage Range: 0V~5V;

    Voltage Accuracy: ±0.05% of FS;

    Voltage Resolution: 0.1mV;

  • Aux Introduction
    It is mainly used to monitor the surface and lug temperature in the battery test process. High Accuracy. The test data can be bound with the main voltage and current data. At the same time, the temperature can be used as the control condition and protection condition of the process step.
Neware and Cookies
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.Read our private policy