CT-4000

Constant Voltage Range Control: 0.025V~5V；

Minimum Discharge Voltage: 2.5V；

Accuracy: ± 0.1% of FS；

Stability: ± 0.1% of FS；

Output Range per Channel: 0.5A~100A ；

Accuracy: ± 0.1% of FS；

Constant Voltage Cut-off Current: 0.2A；

Stability: ± 0.1% of FS；

Single Channel Maximum Output Power: 500W；

Stability: ± 0.1% of FS；

Current Response Time (10%FS~90%FS)

Maximum current rise time: 20ms;

Step Time Range

① ≤(365*24) h/step; ②Time Format Support  00：00：00：00(h, min, s, ms)

Data Acquisition Conditions

Minimum Time Interval: 100ms；

Minimum Voltage Interval: 10mV；

Minimum Current Interval: 200mA；

Data Acquisition Frequency

10Hz；

Charging Mode: Constant Current Charging, Constant Voltage Charging, Constant Current/ Constant Voltage Charging, Constant Power Charging;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity, -△V;

Discharge Mode: Constant Current Discharge, Constant Voltage Discharge, Constant Power Discharge and Constant Resistance Discharge;

Cut-off Conditions: Voltage, Current, Relative Time, Capacity;

Charging: Constant Current Mode and Constant Power Mode;

Discharge: Constant Current Mode and Constant Power Mode;

Minimum Pulse Width: 500ms;

Number of Pulses: A Single Pulse Step Supports 32 Different Pulses;

Continuous Switching of Charge and Discharge: One Pulse Step can Realize Continuous Switching from Charge to Discharge;

Cut off Conditions: Voltage, Relative Time;

Cycle Test Range: 1~65535 times;

Number of Single Cycle Steps: 254；

Loop Nesting: It has the Function of Nested Loop and Supports Up to 3 Levels of Nesting;

Power down Data Protection;

The safety protection conditions can be set, and the setting specs include: voltage upper limit, voltage lower limit, current upper limit, current lower limit and delay time;

Function of Offline Test.

EXCEL 2003, 2010; 

TXT.